E-Bike Conversion Kit Installation Instructions and Videos
Installing the 250 Series (250 Watt) Electric Bike Kit should be straightforward and fairly simple. Most installs take about five minutes, but there are some bicycles that require filing the front forks to fit the larger 8FUN axle. There are also bicycles that may require an adjustment to the v-brake or disc brake system. If you are not familiar with bicycle mechanics, we recommend taking your new electric bike to a bicycle mechanic to adjust the brake system. Most of the work is simple, but it may be best left to a professional if you are not sure what to do.
Installing the 500 Series (500 Watt) Electric Bike Kit requires a few more steps than the 250 Series because of the extra components that come with the e-bike kit. The 500 Series is also straightforward and may require troubleshooting such as filing the front forks to fit the larger 8FUN e-bike motor axle. The 500 Series also requires installing the rear carrier battery rack or the tube mount battery rack. Additionally, the 500 Series requires removing the handlebar grip for the variable thumb throttle as well as installing the pedal assist sensor (PAS) and the front wheel torque arm.
For any installation support, please contact us 24/7 by email at email@example.com or call us M-F 9-5 MDT at (866) 933-8716. We are here to help if needed. Please review the articles on the blog as most installation questions can be found below. If you would like to see additional information or if we are missing a troubleshooting step that you feel would be helpful for others, then please let us know so that we can make the installation process easier for others. Thank you.
If you own an electric bike, you already know the different ways of activating the electric assist of your e-bike:
There is a huge amount of debate around how to get the perfect bicycle tire pressure. Optimum pressure varies due
Electric Bike Kit Rear Carrier Battery Assembly Instructions Begin the assembly of the 500 Series Electric Bike Kit rear carrier battery
The Leeds 500 Series (500 Watt) Electric Bike Kit comes standard with a pedal assist sensor (PAS). The installation of
Installing the 500 Series Electric Bike Kit is not difficult, but it’s not as easy as the 250 Series Electric
When you purchase a new electric bicycle conversion kit from Leeds Bicycle Solutions, one of the first questions our checkout
Installing the Leeds 250 Series is easy. After you have measured the front forks and they are approximately 3.9″ you
Our ebike kits fit 99% of bikes. Our kits have been shipped and installed on bicycles all over the world.
Many folks who are looking to convert their bikes into e-bikes are under the belief that rear wheel conversions are
Watch the 5 Minute Install in… five minutes. A standard installation takes five minutes. If you have v-brakes, installation is